Large Frame Digital Motorized BRINELL Hardness Tester
- Load Cell driven system provides precise control of test force application
- Direct digital reading
- Engineered to obtain highly sensitive and accurate readings
- Perfect for laboratories, workshops, tool rooms, inspection labs, etc.
- Measuring Range: 3.18-650HBW
- Innovative closed-loop technology. The tester incorporates the latest load cell technology.
The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic
measurement and control unit. The result is highly accurate Brinell hardness measurements at all
test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead
weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates
friction problems but also makes the equipment less sensitive to misalignments caused by
- The gross weight of the tester is 50% less than the traditional dead weights type testers.
- Test load selection by keypad and shown on the LCD screen.
- Fully automatic test cycles. The Brinell hardness Tester features a fully automatic test cycle, load
application, dwell, unloading, is performed fully automatically. This greatly improves reproducibility of
test results since operator influence is eliminated.
- Selectable dwell times by screen. The indenter, load, and other test information are shown clearly on the
large LCD screen.
- The directions for 0.102F/D2 ratios selecting according to the materials and hardness range can be
showing on the screen.
- Equipped with a 20X optical microscope to measure the diameter of Brinell indention.
- Brinell Hardness Calculator (BHC) makes the hardness value calculation easy and convenient.
3000kgf (29400N), 1500Kgf (14700N), 1000Kgf (9800N), 750Kgf(7355N),500Kgf (4900N),
250Kgf (2452N), 187.5Kgf (1839N), 125Kgf (1226N),100Kgf (980N), 62.5Kgf(612.9N)
Load dwell duration:
2s～99s, can be set and stored
Tungsten Carbide Ball indenter:
10mm, 5mm, 2.5mm
Magnification of the microscope:
Resolution capability of the microscope:
Accuracy of Brinell Hardness Value:
|>125 < HBW ≤ 225
||>≤ 2 0
Max measurable height:
430 mm (w/large anvil) 450mm (w/small anvil)
Max measurable depth:
220/110 V, 50/60 Hz, 4A
205kg (gross) 165kg(net)